process conditions

The process conditions are studied for the synthesis of o-nitro-p-cresol using p-cresol and nitric acid in dichloromethane. The effects of reaction time, temperature, degree of dispersion and concentration of nitric acid were optimized. The yield is up to 82.3%.

考察了用对甲酚和硝酸在二氯甲烷中合成邻硝基对甲酚的工艺条件，对影响反应的因素，如分散度、反应时间、反应温度、硝酸浓度等进行了优选，产率达到了82.3%。

The effect of different process . conditions on the porous carbonaceous adsorbents prepared by pyrolysis.

考察了不同工艺条件对热解生成的多孔炭质吸附剂的影响.

In these models, the effects of the packing pressure and temperature history are taken into account adequately. The process of residual stresses computation is divided into three steps, appropriate boundary conditions are employed according to the feature of the each steps.

模型中充分考虑了保压压力历史以及温度历史对残余应力的影响，并将计算过程分为三个阶段，针对每个阶段的特点施加不同的边界条件。

The paper discussed the suitable process conditions of activate carbon for sulfur removal.

探讨了活性炭脱硫剂适用的工艺条件,对活性炭脱硫的设计提出了建议.

This paper studies the process conditions and flow of rice wine lees utilization.

研究开发利用黄酒糟的工艺条件和工艺流程.

The effect of rubber structure and process conditions on HIPS properties in bulk-suspension process was studied.

采用本体 - 悬浮法研究了高抗冲聚苯乙烯(HIPS) 所用橡胶的结构及工艺条件对产品性能的影响.

The process conditions of separation and purification via diatom earth filtration and alcohol precipitation were studied.

醇析法是一种有效分离提纯黄原胶的方法.

Optimum process conditions for this gold ore confirmed by the test results.

根据试验的结果,提出了该金矿浸出适宜的工艺条件.

The implementation of the pulse combustion furnace temperature discretized optimization model cleans up the influence of reversing control to combustion process, while ensuring a uniform temperature field under different conditions.

通过脉冲式燃烧炉温控制离散化优化模型的实施，解决了换向控制对燃烧过程的影响，同时保证了不同工况下温度场均布。

The changing conditions of the wool and the influence of some basic factors on the woolen hydrolysis process was investigated, such as alkali quantity, temperature, time, float ratio, hydrogen peroxide solution quantity etc.

研究了在碱氧化水解过程中，羊毛的变化状况和碱用量、温度、时间、液比、水量、双氧水用量等因素对羊毛水解的影响。

Based on this mechanism, optimization of molding process conditions to reduce gas bubble blemish was proposed.

并据此提出了如何减少气道内壁气泡缺陷的工艺条件.

The favorable process conditions is obtained , which has advantages of economic raw materials and high benefit.

该方法具有原料便宜易得、经济效益高等优点.

Impeller configuration is matched to the process conditions.

搅拌桨结构与工艺条件相匹配.

Through the study on the added amount of NaOH, reaction time and temperature, the optimum production process conditions were determined.

通过对氢氧化钠的加入量、应时间、应温度等生产条件的研究，得出了最佳生产工艺条件。

Disposing, assembling d. glazing process conditions suitable to their needs with coatings do not match, leveling.

上光加工中工艺条件同涂料适性不匹配, 流平性差.

Better finishing results are achieved by selecting proper catalyst and additives and optimizing the process conditions.

选择适宜的催化剂和添加剂,通过优化工艺条件获得较好的整理效果.

Gels or contaminants: Make sure you are at the proper process conditions.

凝胶或污染物: 请确保适当的工艺条件.

Low temperature adsorption drying process conditions on potato � � s quality were studied.

研究了马铃薯吸附式干燥条件及其对品质的影响.

Objective To determine the molding process conditions of the medicinal carbon granules.

目的确定药用炭颗粒剂的成型(制粒)工艺条件.

The process conditions in the stages of esterification, melt polymerization and solid state polymerization were discussed.

讨论了酯化反应, 熔融聚合,固相聚合阶段的工艺条件.